Wash It Installation Instructions

Installation Overview (it’s quick and easy)

Looking to install your Wash It Detergent-Less Laundry Solution in your home? Follow these instructions:

  1. Turn off your washer’s cold water supply.
  2. Wall mount the Wash It™ with a screwdriver, using the provided screws & anchors.
  3. Disconnect the cold water line from your washer and connect it to the Wash It™ inlet.
  4. Connect the provided hose from the Wash It™ outlet to your washer’s inlet.
  5. Plug in the Wash It™ to power it on.
  6. Slowly turn your cold water supply back on.
Congratulations, your Wash It™ is installed!
There's also a helpful video to check out:


And for more detailed information, check out the owner's manual which has detailed instructions on page 6 or seen below: 

Back to the top